Configures the AS-external LSA limit and overflow duration associated with OSPF database overflow handling.
| number | Specifies the number of external routes that can be held in a link-state database. |
| seconds | Specifies a duration for which the system has to remain in the overflow state. |
The default for timeout is 0, which indicates that once the router goes into overflow state, it stays there until OSPF is disabled and then re-enabled.
Not applicable.
The following command configures the AS-external LSA limit and overflow duration:
configure ospf ase-limit 50000 timeout 1800
This command was first available in ExtremeXOS 10.1.
This command is available on platforms with Base license, or higher, as described in the Switch Engine v33.1.1 Licensing Guide document.